*LumoPro Quad-Sync Manual Flash

Article code LP180
Add to cart
Buy now, come to the store later.
2 in stock

Product details

The LP180 Quad-Sync Manual Flash provides an essential solution for off-camera flash enthusiasts and incorporates feedback from photographers around the world. The LP180’s durable body design and improved internal components are built to hold up under heavy use in the toughest environments. Every unit is backed up by a 2-year international warranty. A ¼"-20 side mount gives photographers flexibility in mounting the flash. When shooting into an umbrella, use the LP180’s side mount with your swivel and get your light near dead center of the umbrella. Don’t have a light stand? No problem – just use the side mount to attach the LP180 to any tripod or accessory with a ¼"-20 screw. The LP180’s high voltage battery port allows the use of alternative power sources to give extra life to those AA batteries and decrease recycle time. A high voltage battery can reduce recycle times to 1-2 seconds at full power. Photographers can enjoy full control over their light with 1/3-stop power adjustments and a built-in gel holder. And flexible features like an audible flash-ready tone, sleep mode and a backlit LCD screen. As with previous LumoPro flashes, the LP180 features four ways to sync: standard hot shoe, 3.5mm (1/8”) miniphone port, PC port and built-in optical slave. For more information on the LP180’s quad-sync capabilities, check out “Sync Options” below. What’s in the box: 1- LP180 Quad-Sync Manual Flash 1- 3.5mm Miniphone to 3.5mm Miniphone (Short) Sync Cord 1- LP180 Softcase 1- Set of Rosco Color Correction Gels (cut specially for the LP180) 1- Set of Rosco Color Effects Gels (cut specially for the LP180) 1- Small Flash Foot Stand 1- Instruction Manual Guide Number: Every company measures guide number differently. At LumoPro®, this is how we measure guide number: GN= Distance x f/stop, Distance = 10ft, F/stop at 105mm, ISO 100, Full Power = f/11 10ft x f/11 = 110, GN = 110 The LP180's power is roughly equivalent to the Canon Speedlite 600EX-RT or the Nikon SB-900. Sync: 3.5mm (1/8") Miniphone port, PC port, standard ISO hot shoe, built-in optical slave Recycling Time: 4 seconds at full power with fresh NiMH batteries, 1 second at full power with high voltage battery input Bounce (Tilt) Angle: -7°, 0°, 45°, 60°, 75°, 90° Motorized Zoom Settings: 14mm (with wide-angle diffuser), 24mm, 28mm, 35mm, 50mm, 70mm, 80mm, 105mmm, 105mm Swivel Angle: 360° Total Right: 0°, 60°, 75°, 90°, 120°, 150°, 180° Left: 0°, 60°, 75°, 90°, 120°, 150°, 180° Manual Power Settings: Full Power to 1/128 Built-in Slave Function: S0 (off), S1 (standard optical slave), and S2-1 through S2-10 (pre-flash synchronization optical slave). Hot Shoe: Standard ISO size, center pin contact, mounting foot lock with drop-down locking pin. Sleep Mode/Auto Power-off: Sleep mode engages after 20 minutes (if enabled). Auto power-off engages 3 hours after sleep mode. Flash Ready Indicator: Front and rear ready LED light, optional flash ready tone Power Source: Four 1.5V AA size batteries (Alkaline or rechargable NiMH). NOTE: Do not use Nickel Zinc "NiZn" batteries as they can cause damage to the LP180. Included Accessories: Soft case, flash stand, 3.5mm miniphone to 3.5mm miniphone sync cord. Flash Body Dimensions: 8.125" (L) x 2.5" (W) x 2" (D) Flash Head Dimensions: 2.875" (W) x 1.75" (H) Weight (without batteries): 15oz (0.9lbs) (425 grams) (0.0004 metric tons) Warranty: 2 years from date of purchase through authorized LumoPro® dealers.


0 stars based on 0 reviews