Rollei Infrared 400 Black and White Negative Film (35mm, 36 Exposures) - Single Roll
Rollei Infrared 400 Black and White Negative Film (35mm, 36 Exposures) - Single Roll
Couldn't load pickup availability
THE LOW DOWN:
Rollei Infrared 400 is well suited for experimental, creative applications and for scientific photography. This film has a sensitivity up to 820nm and an ISO of 400 without filtering. Perfect exposures can be reached, using special infrared filters, leading to results with an unusual tonal range. Special AURA effects can be obtained by overexposing film. It has high contrast, very fine grain and excellent sharpness and is especially suited for scanning.
Download the technical information sheet.
Features:
- Traditional Black and White Infrared Film
- High speed panchromatic black and white film material with special infrared sensitivity
- Large exposure latitude and a high exposure reserve for application under all lighting and climatic conditions.
- Special coating for improvement of film transport properties of the cameras
- Suitable for daylight or tungsten lighting
- Polyester base support guarantees the highest level of archive stability (LE 500)
- Under careful handling, Rollei Infrared can be inserted and removed from the camera under subdued light conditions.
EXAMPLE RESULTS:
FOR PEOPLE WHO READ:
Fact Sheet
- Nominal Sensitivity: ISO 400/27° | highly sensitive
- Sharpness: very high sharpness
- Exposure Latitude: high exposure latitude
- Resolving Power: very high resolving power
- Suitable for BW Reversal: perfectly suitable as slide
ROLLEI INFRARED DEVELOPMENT TABLE
Infrared Effect
To take full advantage of the performance of the film, we recommend using an infrared filter to achieve the typical infrared “wood effect”.
Can also be used as slide film
Due to the crystal clear PET carrier, the INFRARED is very well suited as a black and white slide.
Agitation: In the first 60 seconds continuously, then for 5 sec every 30 seconds.
Process temperature: 20°C/68°F
The development times given below are to be understood as guide values and refer to an average contrast of γ = 0.65. Due to individual processing conditions, deviations in times are possible.
| Developer | ISO | Dilution | Time [min.] (20°C/68°F) |
|---|---|---|---|
| Rollei Supergrain | 400/27° | 1 + 12 | 7 |
| Rollei RLS | 200/24° | 1 + 4 | 14:30 (24°C) |
| R09/Rodinal | 400/27° | 1 + 25 | 10:30 |
| R09/Rodinal | 400/27° | 1 + 50 | 22 |
| R09 Spezial/Studio | 400/27° | 1 + 15 | 8:30 |
| R09 Spezial/Studio | 400/27° | 1 + 31 | 17 |
| ILFORD ILFOSOL | 400/27° | 1 + 3 | 5 |
| ILFORD PERCEPTOL | 400/27° | stock | 10:50 |
| ILFORD ID-11 / Kodak D-76 | 400/27° | stock | 10:50 |
| Kodak X-TOL | 400/27° | 1 + 1 | 17 |
| Kodak HC-110 | 400/27° | B (1 +31) | 5 |
| Moersch Tanol | 400/27° | 1 + 1 + 100 | 19:30 (24°C) |
Shipping priced for your order
Film shipping is calculated at checkout based on package weight and delivery address, rather than our standard flat rate, to keep your shipping cost as low as possible.
Orders over $150 ship free.
Local? Choose free pickup at our Berkeley store: 2095 Rose Street, Monday–Saturday, 10 a.m.–5 p.m.
Shot your roll? Bring it to us.
Drop off your film at Looking Glass in Berkeley for developing, scanning, and prints. Not sure what to choose? We’ll help you sort out the options.
One roll in. $1 off your next.
Drop off a roll for processing and save $1 on a replacement roll purchased during the same visit. Restock a favorite or try something new.
Description
Description
THE LOW DOWN:
Rollei Infrared 400 is well suited for experimental, creative applications and for scientific photography. This film has a sensitivity up to 820nm and an ISO of 400 without filtering. Perfect exposures can be reached, using special infrared filters, leading to results with an unusual tonal range. Special AURA effects can be obtained by overexposing film. It has high contrast, very fine grain and excellent sharpness and is especially suited for scanning.
Download the technical information sheet.
Features:
- Traditional Black and White Infrared Film
- High speed panchromatic black and white film material with special infrared sensitivity
- Large exposure latitude and a high exposure reserve for application under all lighting and climatic conditions.
- Special coating for improvement of film transport properties of the cameras
- Suitable for daylight or tungsten lighting
- Polyester base support guarantees the highest level of archive stability (LE 500)
- Under careful handling, Rollei Infrared can be inserted and removed from the camera under subdued light conditions.
EXAMPLE RESULTS:
FOR PEOPLE WHO READ:
Fact Sheet
- Nominal Sensitivity: ISO 400/27° | highly sensitive
- Sharpness: very high sharpness
- Exposure Latitude: high exposure latitude
- Resolving Power: very high resolving power
- Suitable for BW Reversal: perfectly suitable as slide
ROLLEI INFRARED DEVELOPMENT TABLE
Infrared Effect
To take full advantage of the performance of the film, we recommend using an infrared filter to achieve the typical infrared “wood effect”.
Can also be used as slide film
Due to the crystal clear PET carrier, the INFRARED is very well suited as a black and white slide.
Agitation: In the first 60 seconds continuously, then for 5 sec every 30 seconds.
Process temperature: 20°C/68°F
The development times given below are to be understood as guide values and refer to an average contrast of γ = 0.65. Due to individual processing conditions, deviations in times are possible.
| Developer | ISO | Dilution | Time [min.] (20°C/68°F) |
|---|---|---|---|
| Rollei Supergrain | 400/27° | 1 + 12 | 7 |
| Rollei RLS | 200/24° | 1 + 4 | 14:30 (24°C) |
| R09/Rodinal | 400/27° | 1 + 25 | 10:30 |
| R09/Rodinal | 400/27° | 1 + 50 | 22 |
| R09 Spezial/Studio | 400/27° | 1 + 15 | 8:30 |
| R09 Spezial/Studio | 400/27° | 1 + 31 | 17 |
| ILFORD ILFOSOL | 400/27° | 1 + 3 | 5 |
| ILFORD PERCEPTOL | 400/27° | stock | 10:50 |
| ILFORD ID-11 / Kodak D-76 | 400/27° | stock | 10:50 |
| Kodak X-TOL | 400/27° | 1 + 1 | 17 |
| Kodak HC-110 | 400/27° | B (1 +31) | 5 |
| Moersch Tanol | 400/27° | 1 + 1 + 100 | 19:30 (24°C) |
Shipping & Pick Up
Shipping & Pick Up
Shipping priced for your order
Film shipping is calculated at checkout based on package weight and delivery address, rather than our standard flat rate, to keep your shipping cost as low as possible.
Orders over $150 ship free.
Local? Choose free pickup at our Berkeley store: 2095 Rose Street, Monday–Saturday, 10 a.m.–5 p.m.
Film Processing
Film Processing
Shot your roll? Bring it to us.
Drop off your film at Looking Glass in Berkeley for developing, scanning, and prints. Not sure what to choose? We’ll help you sort out the options.
One roll in. $1 off your next.
Drop off a roll for processing and save $1 on a replacement roll purchased during the same visit. Restock a favorite or try something new.
